Reply to thread

Message: <blockquote data-quote="trumpet" data-source="post: 8242590" data-attributes="member: 628688"><p>The safest way to do this is to fuse each wire either in a fused distribution block or with an inline fuse on each smaller wire. The rated power output of the amplifier(s) is not a concern for choosing a fuse. 100 amp for 4 ga CCA or 150 amp for 4 ga OFC. It appears that amplifier does not have built in fusing, so I suggest you refer to the installation manual for further guidance.</p></blockquote><p></p>

Top