Reply to thread

Message: <blockquote data-quote="phantom240" data-source="post: 2730040" data-attributes="member: 562504"><p>Okay, so I just got done hooking up a friend's directed 1200d (new series, silver) amp with 2 DVC memphis subs (4 ohm per coil) all in parallel so that I get a 1 ohm load, which the amp is stable for. We tested out the amp and got the gains set and it worked great. We turn off the amp and then when we get back in to go for a ride, theres no output. We're stumped. The status light is green, indicating a normal circuit, and the ESP indicator is solid red, which indicates normal operation as well. No wires came undone and we cant figure out for the life of us whats wrong. The amp is powering up as it should, the head unit is on and playing... and the user's manual is of little use. Can anyone help us out?</p></blockquote><p></p>

Top