Reply to thread

Message

<blockquote data-quote="HandsomeSteve" data-source="post: 8876719" data-attributes="member: 691119">what my research has unveiled is if the camera&#039;s video feed isn&#039;t coming on as expected like when *****. is shifted to reverse then I need to check what the current settings are adjusted to then change to another option. this is a PITA BC when camera is connected incorrectly or configured incorrectly I lose all display I get a error message display is being reservsed.it took me quite awhile to figure how to restore the display. I thought I ruined the AVIC anyway I was able to restore the display changed one setting I think it was battery polarity, shifted to reverse same crape differnt day display is being reversed (no display an more stress).I&#039;ll look again at all the camera options IIRC where camera on/off battery polarity pos neg. and report back.I do have a elcheapo aduiovox monitor I used on my previous tow vehical&nbsp; so I may post up on it&#039;s set-up. just don&#039;t want this old 2009 AVIC to take a dump messing around w/ a rear camera feed.additionaly the Pioneer lite green wire I believe is being used for the NAV it&#039;s the parking brake switch, the parking brake must be depressed in order for NAV to allow me to enter an address. not sure if this lite green wire has 2 functons. also I believe there is an optional 3 wired switch that can be connected to the parking brake for the NAV then use the lite green wire for camera.thanks <h4>[USER=654802]1aespinoza[/USER] for advise</h4></blockquote>

[QUOTE="HandsomeSteve, post: 8876719, member: 691119"] what my research has unveiled is if the camera's video feed isn't coming on as expected like when *****. is shifted to reverse then I need to check what the current settings are adjusted to then change to another option. this is a PITA BC when camera is connected incorrectly or configured incorrectly I lose all display I get a error message display is being reservsed. it took me quite awhile to figure how to restore the display. I thought I ruined the AVIC anyway I was able to restore the display changed one setting I think it was battery polarity, shifted to reverse same crape differnt day display is being reversed (no display an more stress). I'll look again at all the camera options IIRC where camera on/off battery polarity pos neg. and report back. I do have a elcheapo aduiovox monitor I used on my previous tow vehical so I may post up on it's set-up. just don't want this old 2009 AVIC to take a dump messing around w/ a rear camera feed. additionaly the Pioneer lite green wire I believe is being used for the NAV it's the parking brake switch, the parking brake must be depressed in order for NAV to allow me to enter an address. not sure if this lite green wire has 2 functons. also I believe there is an optional 3 wired switch that can be connected to the parking brake for the NAV then use the lite green wire for camera.thanks [HEADING=3][USER=654802]1aespinoza[/USER] for advise[/HEADING] [/QUOTE]

Verification