Reply to thread

Message: <blockquote data-quote="Thuracine187" data-source="post: 620279" data-attributes="member: 557842">im gonna be making a box for my 2 12w0 in the near future. Its gonna be all 1 box with a divider so each sub will have about 2.3 cubic feet and its own port. the port legth is where i get the problem.my max width for the whole box is 40in and gonna be using 3/4 mdf with a divider so thats 37.75 internal width40 - 1.5 - .75(for divider)each subwidth = 18.5height = 16.5port diameter = 5when i plug all the numbers into the pL formula i get like 81.3in. that seems a little big to me. so if some could tell me if that is correct and if not point me into the right direction i would really appreciate thanx.</blockquote>

Top