Reply to thread

Message

<blockquote data-quote="Nukedsodapop" data-source="post: 3019769" data-attributes="member: 556426">hey guys, i&#039;m going for a box that isn&#039;t peaky and has a full range (or as much as i can get) from a 18 rl-p in the back half of a firebird, i&#039;m using the space where the back seats would be, and I&#039;m taking them out and utilzing that space. I wanted some of you to look at the pictures I drew of the box that&#039;s in my head, the rl-p would be inside of the box, and mounted sideways, so the front of the speake is in the smaller half of the box, while the back half is on the bigger side, with one long port firing into the back where the well area is. the port would be divided into two uneven sides, one tuned for the higher area of the Hz spectrum, where the other is for the lower, where each of them drop off. I&#039;m gonna need a little help with the tuning though, if anyone could help me out that would be appreciated, and i dont know the exact demensions of everything yet, but I&#039;m sure that will help, again, I&#039;m looking&nbsp; for the woofer to be inside of the box, and I&#039;m not really looking for a normal ported or sealed box. Any help or input will be appreciated. Here is the pic of what I have in my head haha<img src="http://img.photobucket.com/albums/v700/Nukedsodapop/box.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />Again, thanks.Blake</blockquote>

[QUOTE="Nukedsodapop, post: 3019769, member: 556426"] hey guys, i'm going for a box that isn't peaky and has a full range (or as much as i can get) from a 18 rl-p in the back half of a firebird, i'm using the space where the back seats would be, and I'm taking them out and utilzing that space. I wanted some of you to look at the pictures I drew of the box that's in my head, the rl-p would be inside of the box, and mounted sideways, so the front of the speake is in the smaller half of the box, while the back half is on the bigger side, with one long port firing into the back where the well area is. the port would be divided into two uneven sides, one tuned for the higher area of the Hz spectrum, where the other is for the lower, where each of them drop off. I'm gonna need a little help with the tuning though, if anyone could help me out that would be appreciated, and i dont know the exact demensions of everything yet, but I'm sure that will help, again, I'm looking for the woofer to be inside of the box, and I'm not really looking for a normal ported or sealed box. Any help or input will be appreciated. Here is the pic of what I have in my head haha [IMG]http://img.photobucket.com/albums/v700/Nukedsodapop/box.jpg[/IMG] Again, thanks. Blake [/QUOTE]

Verification