Reply to thread

Message

<blockquote data-quote="Slobalt" data-source="post: 8223304" data-attributes="member: 656370">Vehicle :Cobalt 2 drLocation in the vehicle:TrunkSpace available (Length x Width x Height):24&quot; x 31&quot; x 15&quot;Subwoofer make and model:SA 8 V2Subwoofer Size:8&quot;Number of Subwoofers:3Type of Port (Kerfed, Slot, Aero, etc.):SlotWhat type of music do you like?:Rap/rockIs your goal SPL or Everyday Music?:MusicTuning Freq (Hz):Aiming for 32hzVolume :2.25 ft3Questions:I&#039;ve been playing with winisd and I can&#039;t get the port to be a reasonable size (smaller). I tried doing 16 x 2.25 = port area needed and that results in too much port noise. I then tried to increase the port area, which takes away from the port noise but makes the port length way too long. So what am I doing wrong or how can I fix my problem.</blockquote>

[QUOTE="Slobalt, post: 8223304, member: 656370"] Vehicle :Cobalt 2 dr Location in the vehicle:Trunk Space available (Length x Width x Height):24" x 31" x 15" Subwoofer make and model:SA 8 V2 Subwoofer Size:8" Number of Subwoofers:3 Type of Port (Kerfed, Slot, Aero, etc.):Slot What type of music do you like?:Rap/rock Is your goal SPL or Everyday Music?:Music Tuning Freq (Hz):Aiming for 32hz Volume :2.25 ft3 Questions:I've been playing with winisd and I can't get the port to be a reasonable size (smaller). I tried doing 16 x 2.25 = port area needed and that results in too much port noise. I then tried to increase the port area, which takes away from the port noise but makes the port length way too long. So what am I doing wrong or how can I fix my problem. [/QUOTE]

Verification