Reply to thread

Message: <blockquote data-quote="crhye250r" data-source="post: 367639" data-attributes="member: 545515"><p>You will make those connections in the main ignition harness under the steering column.  As long as the key head is black and not gray, you wont need a bypass.  That vehicle should be a fairly easy one.  I have done a couple.  Are you installing keyless entry, or any of the other features?  If you need any help along the way, i can guide you through it.  Keep in mind you will also need to run a 12volt lead from the ignition harness (relay satelite) to the brain.  Be sure to make a good clean ground (i usually do mine in the kick panel).  I also solder all my connections in the relay pack.  If you have any other questions, hit me up.</p></blockquote><p></p>

Top