Reply to thread

Message

<blockquote data-quote="benchambers80" data-source="post: 4623913" data-attributes="member: 585940">I could make you a spacer but I only have scrap 3/4 mdf. If you put those rsd&#039;s in there you might have to cut some sheet metal, which isnt the end of the world. Bigger problem is the mounting depth and speaker clearence from the factory grill/door panel.You may not be able to roll you windows all the way down if your not carefull, PG are pretty deep, depending on your use of the MA/C, it may not be the end of the world.Your door panel might not fit on properly/ not enough clearence. Try to put something behind your door to simulate the extra clearance needed, see how your door panel fits.If you ever sell the car you can just throw in some 4x6 and screw them into the remaing sheet metal.If you need the rings, like a said in your other thread, get me the dims.Also look at the rsd 6.0 &#039;s they might be easier to work with.</blockquote>

[QUOTE="benchambers80, post: 4623913, member: 585940"] I could make you a spacer but I only have scrap 3/4 mdf. If you put those rsd's in there you might have to cut some sheet metal, which isnt the end of the world. Bigger problem is the mounting depth and speaker clearence from the factory grill/door panel. You may not be able to roll you windows all the way down if your not carefull, PG are pretty deep, depending on your use of the MA/C, it may not be the end of the world. Your door panel might not fit on properly/ not enough clearence. Try to put something behind your door to simulate the extra clearance needed, see how your door panel fits. If you ever sell the car you can just throw in some 4x6 and screw them into the remaing sheet metal. If you need the rings, like a said in your other thread, get me the dims. Also look at the rsd 6.0 's they might be easier to work with. [/QUOTE]

Verification