Reply to thread

Message

<blockquote data-quote="LightningStryk7" data-source="post: 850938" data-attributes="member: 560153">Alright can somone double check this? Its for 1x 1242D Alpine Tye R Subinternal DimensionsH= 13.5&quot;W= 30.5&quot;D= 11.1&quot;Slot Port SpecsLength= 31.21&quot;Port area= (2&quot;x13.5)=27&quot;Box Volume= 2.0 ft^3Desired tuning frequency= 32 hzDisplacementsSub Displacement= .071 ft^3Port Displacment= .5739 ft^3I belive this should be an L port with port wall 1 being 9.1&quot;And port wall 2 being 17.61&quot;SO can somone double check this? I belive it should be correct&nbsp; //content.invisioncic.com/y282845/emoticons/veryhappy.gif.fec4fed33b4a1279cf10bdd45a039dae.gifIm running sealed right now and want to try ported. Would 2.0 cubes be to much? Alpine recommends 1.0-1.75 cuft or something like that.</blockquote>

[QUOTE="LightningStryk7, post: 850938, member: 560153"] Alright can somone double check this? Its for 1x 1242D Alpine Tye R Sub internal Dimensions H= 13.5" W= 30.5" D= 11.1" Slot Port Specs Length= 31.21" Port area= (2"x13.5)=27" Box Volume= 2.0 ft^3 Desired tuning frequency= 32 hz Displacements Sub Displacement= .071 ft^3 Port Displacment= .5739 ft^3 I belive this should be an L port with port wall 1 being 9.1" And port wall 2 being 17.61" SO can somone double check this? I belive it should be correct [IMG]//content.invisioncic.com/y282845/emoticons/veryhappy.gif.fec4fed33b4a1279cf10bdd45a039dae.gif[/IMG] Im running sealed right now and want to try ported. Would 2.0 cubes be to much? Alpine recommends 1.0-1.75 cuft or something like that. [/QUOTE]

Verification