Reply to thread

Message: <blockquote data-quote="Rudy" data-source="post: 6108570" data-attributes="member: 568035"><p>Yeah, foam between the plastic trim panel and sheet metal is going to be your best bet. A little bit of vibration damper on the sheet metal will help but isolation is key. Rear decks are notorious problems. Not only do you have the plastic and sheet metal in contact with each other but quite often all sorts of other rattly things are mounted there - seat belt reels, 3rd brake lights, trunk lid lift springs and on and on. You really need to address each source.</p></blockquote><p></p>

Top