Reply to thread

Message

<blockquote data-quote="09civic" data-source="post: 7208985" data-attributes="member: 628467">heres the specs for the level 3s...LV3 10&quot; 12&quot; 15&quot;Mounting Depth 6.25&quot; 6.75&quot; 8&quot;Mounting Hole Diameter 9.25&quot; 11&quot; 14&quot;Motor Width 6.5&quot; 6.5&quot; 6.5&quot;Weight 19.5lbs 20lbs 21lbsVC Diameter 3&quot; 3&quot; 3&quot;Displacement .14³ ft .15³ ft .17³ ftMagnet Weight 17.5lbs 17.5lbs 17.5lbsPower Handling RMS/Peak&nbsp; 600/1200 600/1200 600/1200Impedance (Ohm) d2 or d4&nbsp; d2 or d4&nbsp; d2 or d4Sd 487.00 cm² 494.00 cm^² 791.00 cm²Vas 32.10 L&nbsp; 74.15 L&nbsp; 162.80 LCms 9.67e-05 m/N 2.17e-04 m/N 1.86e-04 m/NCas 2.29e-07 m^5/N&nbsp; 1.16e-06 m^5/NMms 242.06 g 145.73 g 198.55 gFs 32.9 Hz 28.3 Hz 26.2 HzBl 22.18 22.18 22.18Re 5.80 ohm 5.89 ohm 6.10 ohmLe 5.06 mH 5.06 mH 5.06 mHQms 5.21 8.11 8.40Qes 0.59 0.59 0.71Qts 0.53 0.55 0.65Xmax 22.5 mm 22.5 mm 22.5 mmSensitivity 84.70 dB 86.40 dB 88.0 dBSuggested Sealed .65³ ft 1³ ft 2³ ftSuggested Ported&nbsp; 1³ ft 1.5³ ft 3³ ft</blockquote>

[QUOTE="09civic, post: 7208985, member: 628467"] heres the specs for the level 3s... LV3 10" 12" 15" Mounting Depth 6.25" 6.75" 8" Mounting Hole Diameter 9.25" 11" 14" Motor Width 6.5" 6.5" 6.5" Weight 19.5lbs 20lbs 21lbs VC Diameter 3" 3" 3" Displacement .14³ ft .15³ ft .17³ ft Magnet Weight 17.5lbs 17.5lbs 17.5lbs Power Handling RMS/Peak 600/1200 600/1200 600/1200 Impedance (Ohm) d2 or d4 d2 or d4 d2 or d4 Sd 487.00 cm² 494.00 cm^² 791.00 cm² Vas 32.10 L 74.15 L 162.80 L Cms 9.67e-05 m/N 2.17e-04 m/N 1.86e-04 m/N Cas 2.29e-07 m^5/N 1.16e-06 m^5/N Mms 242.06 g 145.73 g 198.55 g Fs 32.9 Hz 28.3 Hz 26.2 Hz Bl 22.18 22.18 22.18 Re 5.80 ohm 5.89 ohm 6.10 ohm Le 5.06 mH 5.06 mH 5.06 mH Qms 5.21 8.11 8.40 Qes 0.59 0.59 0.71 Qts 0.53 0.55 0.65 Xmax 22.5 mm 22.5 mm 22.5 mm Sensitivity 84.70 dB 86.40 dB 88.0 dB Suggested Sealed .65³ ft 1³ ft 2³ ft Suggested Ported 1³ ft 1.5³ ft 3³ ft [/QUOTE]

Verification