Reply to thread

Message

<blockquote data-quote="Mr.Ronin_2U" data-source="post: 6460246" data-attributes="member: 607520">From Seller - dB-r Electronics10/28/2009 12:41 PDTYes that is correct. No, nothing else needed, as soon as it arrives I will refund your money. For future reference, the SAE-1200&#039;s are the bottom of the barrel sundown amps, while the new v2 SAE-1200D will be much more reliable, still the SAZ line is what I personally would spend my money on. The SAE-1200D=cheap china amp, the SAZ line is top of the line Korean built amps. Just FYI. Though you probably already know this.From Buyer - Michael Hayes11/3/2009 18:00 PSTPackage was delivered.From Seller - dB-r Electronics11/4/2009 09:30 PSTReceived the amplifier back here, thanks for including the remote by the way... The amplifier only had 1 small problem, with the input board (the board the RCA&#039;s, GAIN, etc are all on), and matter of fact it still worked fine, but had lower than normal output. Upon touching up a few solder connections on the input board all is well and amplifier functions exactly as it should, have been testing it for over 30 minutes now at full volume, have dropped it on the desk a few times checking for intermittent problems and have found none. Issuing refund now anyway, as to resolve this matter with this customer.</blockquote>

[QUOTE="Mr.Ronin_2U, post: 6460246, member: 607520"] From Seller - dB-r Electronics 10/28/2009 12:41 PDT Yes that is correct. No, nothing else needed, as soon as it arrives I will refund your money. For future reference, the SAE-1200's are the bottom of the barrel sundown amps, while the new v2 SAE-1200D will be much more reliable, still the SAZ line is what I personally would spend my money on. The SAE-1200D=cheap china amp, the SAZ line is top of the line Korean built amps. Just FYI. Though you probably already know this. From Buyer - Michael Hayes 11/3/2009 18:00 PST Package was delivered. From Seller - dB-r Electronics 11/4/2009 09:30 PST Received the amplifier back here, thanks for including the remote by the way... The amplifier only had 1 small problem, with the input board (the board the RCA's, GAIN, etc are all on), and matter of fact it still worked fine, but had lower than normal output. Upon touching up a few solder connections on the input board all is well and amplifier functions exactly as it should, have been testing it for over 30 minutes now at full volume, have dropped it on the desk a few times checking for intermittent problems and have found none. Issuing refund now anyway, as to resolve this matter with this customer. [/QUOTE]

Verification