Reply to thread

Message: <blockquote data-quote="caraudio93" data-source="post: 7419016" data-attributes="member: 633518"><p>Ok so i took it out and each VC was about 4.2 ohms. The problem was that somehow the wires that i had connecting the two VC's had gotten frayed and so there were only a few strands hanging on. So i redid my entire sub wiring with 10 guage wire instead of 20 guage wire, and now it reads at 2.1 or 2.2 ohms at the amp. MUCH better haha. So my fault, i learned my lesson. thanks for helping</p></blockquote><p></p>

Top