Reply to thread

Message

<blockquote data-quote="Mr Cabinetry" data-source="post: 2890479" data-attributes="member: 571490">I have seen this template before on the Impala SS forum.Dimensions vary somewhat from the enclosure&#039;s that I&#039;ve built for 94-96 Impala SS ( same trunk for the caprice ), so, you might want to create a cardboard template of the side profile of the enclosure as the present template because the part that sits below the rear deck is taller and the slant bottom that drops down to the floor is not as long.Also, that height you want to verify as well because of the speakers mounted in the rear deck ( according to my designs ) only allow for a height of 15&quot;.Impala Box Designs: <a href="http://s29.photobucket.com/albums/c251/MrCabinetry/Impala%20Boxes/" target="_blank">http://s29.photobucket.com/albums/c251/MrCabinetry/Impala%20Boxes/</a>As for the width, the max you can go is correct at 44&quot; between the rear deck lid spring brackets.</blockquote>

[QUOTE="Mr Cabinetry, post: 2890479, member: 571490"] I have seen this template before on the Impala SS forum. Dimensions vary somewhat from the enclosure's that I've built for 94-96 Impala SS ( same trunk for the caprice ), so, you might want to create a cardboard template of the side profile of the enclosure as the present template because the part that sits below the rear deck is taller and the slant bottom that drops down to the floor is not as long. Also, that height you want to verify as well because of the speakers mounted in the rear deck ( according to my designs ) only allow for a height of 15". Impala Box Designs: [URL="http://s29.photobucket.com/albums/c251/MrCabinetry/Impala%20Boxes/"]http://s29.photobucket.com/albums/c251/MrCabinetry/Impala%20Boxes/[/URL] As for the width, the max you can go is correct at 44" between the rear deck lid spring brackets. [/QUOTE]

Verification