Reply to thread

Message

<blockquote data-quote="thatkidbob" data-source="post: 2208654" data-attributes="member: 566497">he said he uses the 2 big ones after he&#039;s done heatshrink around the individual wires //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gifpersonally i solder &amp;amp; electrical tape, although heatshrink would be better. They both look VERY professional when you&#039;ve spiraled the wires around each other and cut all the wires involved to the same length.twist the wires together, and hit it wire with the soldering iron, press the solder against the wire near the iron, but not touching... when the wire hits the melting temperature of the solder it&#039;ll start melting into the wire and moving through the joint via capilary action.then you remove the iron, the solder solidifies, and you&#039;re done //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif</blockquote>

[QUOTE="thatkidbob, post: 2208654, member: 566497"] he said he uses the 2 big ones after he's done heatshrink around the individual wires [IMG]//content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif[/IMG] personally i solder & electrical tape, although heatshrink would be better. They both look VERY professional when you've spiraled the wires around each other and cut all the wires involved to the same length. twist the wires together, and hit it wire with the soldering iron, press the solder against the wire near the iron, but not touching... when the wire hits the melting temperature of the solder it'll start melting into the wire and moving through the joint via capilary action. then you remove the iron, the solder solidifies, and you're done [IMG]//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif[/IMG] [/QUOTE]

Verification