Reply to thread

Message: <blockquote data-quote="FML" data-source="post: 8346626" data-attributes="member: 630747"><p>Understood. So, I would personally like to run the battery negative to the frame rail rather than bolting it to the sheet metal. I assume the sheet metal body is only spot welded to the frame. But will I be better off running a 6 inch run to the sheet metal fender well, sacrifices a bit on solidness of ground, but a short lead, or have a 2 foot run going to a much more solid ground? Im just concerned with running such long ground wire when its known it should be as short as possible? Thanks</p></blockquote><p></p>

Top