Reply to thread

Message: <blockquote data-quote="Atimm693" data-source="post: 6674599" data-attributes="member: 572164">You can wire two amps to one Preout easily. 9/10 amps will have an RCA output, just run an RCA cable from the pre-out to the first amp, then a short one to the inputs of the second from the outputs of the first.. If neither of your amps have outputs than you can always get a Y-splitter from walmart for 10.00 and just split it.  And also, you should never tie in double wires unless you know what you're doing. If his amp isn't 2 ohm stable (it probably is) then his amp probably wouldn't last very long before it blew.OP:It's probably best you just get another amp to power the sub. It's not hard to do assuming you have big enough wiring for it. What gauge is your power wire?</blockquote>

Top