Reply to thread

Message: <blockquote data-quote="thefunkybunch" data-source="post: 1383964" data-attributes="member: 563903">iirc you can use the peripheral swalp and integrate with the factory stereo controls by the start button, and this is not an infrared repeator, it plugs directly into the back of the deck.  i believe a 9847 or anything above that will work with it, but not 100% off the top of my head.any good component set should be able to knock out some low end.  boston pro or Z6 do very well, the jl audio XR or ZR do very well.  if you're on a budget, i had a set of VR's a loong time ago that did very well with about 120 watts per channel.just because you have 100 watts per channel doesn't mean you will use all of it.  it's good to have more power than you need.  nothing like having plenty of headroom.</blockquote>

Top