Reply to thread

Message

<blockquote data-quote="PhatBoyG" data-source="post: 2713796" data-attributes="member: 574326">Okay, so I&#039;ve been out of the game for a while, but I&#039;m trying (see my thread in the newbie zone if you care to see what I&#039;ve done in the past). I&#039;m looking to design a system for a 2007 Subaru WRX STI.Here are my thoughts on the initial component selection:Pioneer AVIC-D3 (with the second gen bluetooth and iPod cable, once I verify it can play Apple Lossless files)Zapco DC500.1 (subs) and Zapco DC1000.4 (mids/tweets)Front Stage Rainbow Germaniums or Boston Pro60sSubs maybe 4x ED 9k.v2s or maybe TC-1000sI&#039;m all about SQ, I could care less about max dB. I&#039;m using the digital amps from Zapco because they aren&#039;t much more than their standard lineup and the features seem to rock. I have an RTA, so tuning will be easy.I also plan to do a decent deadening of the doors/interior (about 25 lbs of material), there is a good thread on iWSTI about that alone.I&#039;m looking for comments on the component selection. The mids/tweets would go in the door and the subwoofer would be mounted under the rear deck firing into the cabin area.Thanks in advance for any comments/tips/advice!</blockquote>

[QUOTE="PhatBoyG, post: 2713796, member: 574326"] Okay, so I've been out of the game for a while, but I'm trying (see my thread in the newbie zone if you care to see what I've done in the past). I'm looking to design a system for a 2007 Subaru WRX STI. Here are my thoughts on the initial component selection: Pioneer AVIC-D3 (with the second gen bluetooth and iPod cable, once I verify it can play Apple Lossless files) Zapco DC500.1 (subs) and Zapco DC1000.4 (mids/tweets) Front Stage Rainbow Germaniums or Boston Pro60s Subs maybe 4x ED 9k.v2s or maybe TC-1000s I'm all about SQ, I could care less about max dB. I'm using the digital amps from Zapco because they aren't much more than their standard lineup and the features seem to rock. I have an RTA, so tuning will be easy. I also plan to do a decent deadening of the doors/interior (about 25 lbs of material), there is a good thread on iWSTI about that alone. I'm looking for comments on the component selection. The mids/tweets would go in the door and the subwoofer would be mounted under the rear deck firing into the cabin area. Thanks in advance for any comments/tips/advice! [/QUOTE]

Verification