Reply to thread

Message: <blockquote data-quote="wilson" data-source="post: 4716648" data-attributes="member: 559157">I also heard about those same problems.  I haven't had any problems so far (knock on wood!), but that's why I stressed getting it from an authorized dealer in my previous post.  If it breaks, just RMA and get another one.As far as additional connectors, it depends.  If you decide to use the high level inputs, you just need to tap the signal of each channel and run the wire to the 3Sixty.  Or you can use a Line-Out-Converter (you'd still need to tap the signal of each channel and feed it to the LOC), run RCA's to the low-level inputs on the 3Sixty.  Hope this helps.</blockquote>

Top