Reply to thread

Message

<blockquote data-quote="Jdk" data-source="post: 1016221" data-attributes="member: 562164">Hello.I just tried an installation of my new Clarion marine APX480M Marine Amp (640W 4-Channel) and CMSW10.1S subwoofer today.I am attempting to bridge two channels of the amp to run the sub and use the remaining two channels to power a pair of Clarion CM1622-RET 6.5&quot; speakers.&nbsp; I wired the amp per the diagram in the user&#039;s manual with input to channels 1 &amp;amp; 2 coming from the pre-amp outputs in the Clarion XMD3-RET head unit.I powered up the amp, the light came on and SUPRISE......no sound!&nbsp; I double checked everything including different RCA cables.&nbsp; Still no sound at all.Next I tried using the speaker level imputs and I get sound from the speakers, but it is no louder than usual.&nbsp; Additionally, the sub does not work at all....even with the speaker level imputs.I just don&#039;t know what else to try.&nbsp; Everything purchased was NIB.Please help!Jeff</blockquote>

[QUOTE="Jdk, post: 1016221, member: 562164"] Hello. I just tried an installation of my new Clarion marine APX480M Marine Amp (640W 4-Channel) and CMSW10.1S subwoofer today. I am attempting to bridge two channels of the amp to run the sub and use the remaining two channels to power a pair of Clarion CM1622-RET 6.5" speakers. I wired the amp per the diagram in the user's manual with input to channels 1 & 2 coming from the pre-amp outputs in the Clarion XMD3-RET head unit. I powered up the amp, the light came on and SUPRISE......no sound! I double checked everything including different RCA cables. Still no sound at all. Next I tried using the speaker level imputs and I get sound from the speakers, but it is no louder than usual. Additionally, the sub does not work at all....even with the speaker level imputs. I just don't know what else to try. Everything purchased was NIB. Please help! Jeff [/QUOTE]

Verification