Reply to thread

Message

<blockquote data-quote="sundownz" data-source="post: 3408047" data-attributes="member: 549523">The thing is, the DD motor REQUIRES more magnet to achieve the same BL. Even if it DOES have 6.25 more pounds of magnet... it doesn&#039;t matter, it needed it, the Konaki sub has more motor strength than the 9500E that I measured, and likely darn near exactly the same as the 9500G -- less magnet or not.So, the point is totally moot even if you would like to continue debating it... even when I suggested, as you noted, other places where the weight could be in the motor. Places whereby the BL is increased without adding magnet to the motor //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif End result BL is the same, but the DD motor does end up w/ better cooling.I never suggested Konaki would have listed the weight wrong on purpose... but I doubt they have a great deal of engineering prowess, so my suggestion was they made a mistake. But likely, as we have determined, the weight is in the steel that Konaki does NOT remove from the motor.</blockquote>

[QUOTE="sundownz, post: 3408047, member: 549523"] The thing is, the DD motor REQUIRES more magnet to achieve the same BL. Even if it DOES have 6.25 more pounds of magnet... it doesn't matter, it needed it, the Konaki sub has more motor strength than the 9500E that I measured, and likely darn near exactly the same as the 9500G -- less magnet or not. So, the point is totally moot even if you would like to continue debating it... even when I suggested, as you noted, other places where the weight could be in the motor. Places whereby the BL is increased without adding magnet to the motor [IMG]//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif[/IMG] End result BL is the same, but the DD motor does end up w/ better cooling. I never suggested Konaki would have listed the weight wrong on purpose... but I doubt they have a great deal of engineering prowess, so my suggestion was they made a mistake. But likely, as we have determined, the weight is in the steel that Konaki does NOT remove from the motor. [/QUOTE]

Verification