Reply to thread

Message

<blockquote data-quote="fozzymuphet" data-source="post: 4269602" data-attributes="member: 561353">So I&#039;m semi planning my dream system. All I need now is to buy most of the stuff which won&#039;t take too long, probably a month or two and I&#039;ll have it done by summer.But I want to do this right.Here are my projected ampsHifonics 2000D or 1600DCal Cell 200w 2 channelCall Cell 400w 4 ChannelThump Car audio 250w 2 ChannelMobile Audio 106ZX 180w 2 channel(I have everything except the sub amp and I may not need the last 2 amps)I plan on running the 4gauge that I have now into a distro block the will run 8&#039;s to all of the amps except the Hifonics and buying either a 2gauge or a 1/0 gauge for the sub amp.I drive a Mitsubishi Eclipse 1996 RS 420a and I believe the alt puts out 130amps which I will AT LEAST have respun.Now what I would like to know is How many and what types of batteries do I need to buy. Also do I NEED to have a bigger ALT and is it worth considering an 18volt system.Thanks. Let me know if you need more infoHere&#039;s the speaker setup2 Sets of Phoenix gold RSD65cs components with the RSD3 midrange speaker, active crossovers, hence the 8 channels between the 3 amps and possibly another set of RSD 3&#039;s in the back1 Treo Engineering SSX12.22 hence the 2000w amp. I may end up going with a MA audio amp to offset the costs but I still haven&#039;t decided if I want to go THAT cheap.</blockquote>

[QUOTE="fozzymuphet, post: 4269602, member: 561353"] So I'm semi planning my dream system. All I need now is to buy most of the stuff which won't take too long, probably a month or two and I'll have it done by summer. But I want to do this right. Here are my projected amps Hifonics 2000D or 1600D Cal Cell 200w 2 channel Call Cell 400w 4 Channel Thump Car audio 250w 2 Channel Mobile Audio 106ZX 180w 2 channel (I have everything except the sub amp and I may not need the last 2 amps) I plan on running the 4gauge that I have now into a distro block the will run 8's to all of the amps except the Hifonics and buying either a 2gauge or a 1/0 gauge for the sub amp. I drive a Mitsubishi Eclipse 1996 RS 420a and I believe the alt puts out 130amps which I will AT LEAST have respun. Now what I would like to know is How many and what types of batteries do I need to buy. Also do I NEED to have a bigger ALT and is it worth considering an 18volt system. Thanks. Let me know if you need more info Here's the speaker setup 2 Sets of Phoenix gold RSD65cs components with the RSD3 midrange speaker, active crossovers, hence the 8 channels between the 3 amps and possibly another set of RSD 3's in the back 1 Treo Engineering SSX12.22 hence the 2000w amp. I may end up going with a MA audio amp to offset the costs but I still haven't decided if I want to go THAT cheap. [/QUOTE]

Verification