Reply to thread

Message

<blockquote data-quote="hannibal05" data-source="post: 3040231" data-attributes="member: 576342">I purchased a set of CDT HD-62&#039;s from a member here on the forum. I have them hooked up to a Memphis Belle bridging the 1-2 / 3-4. According to my DMM I&#039;m putting right at 24.5 volts which should equate to 175 watts of power into each door. I&#039;ve got them crossed at 100hz.Ok the issue I&#039;m having is the tweets keep going into protect mode when I try to turn it up. My deck is capable of turning up to 50 and with everything running I never go over 35. As soon as I hit 29-30 there goes the tweets. The slope/switch on the crossover is at 0 with a +3 to -3 option. I&#039;ve even triedAfter you turn down the volume they come back on. If I turn the power of the amp down to where they don&#039;t shut off my POS stock speakers running off the deck are almost as loud as the CDT&#039;s.&nbsp; With everything turned up with the 175 watts going to them the mids sound really good and that is what gets me.I&#039;ve tried everything from running them at HP to start off with, switched them to full, to adjusting the amp with a max of 30 on the volume, to trying everything on my deck. Needless to say I&#039;ve tried just about everything I can think of. I&#039;ve ran out of ideas so I&#039;m begging for someone to help out this semi-noobie get his chit straight. Thanks in advance!!</blockquote>

[QUOTE="hannibal05, post: 3040231, member: 576342"] I purchased a set of CDT HD-62's from a member here on the forum. I have them hooked up to a Memphis Belle bridging the 1-2 / 3-4. According to my DMM I'm putting right at 24.5 volts which should equate to 175 watts of power into each door. I've got them crossed at 100hz. Ok the issue I'm having is the tweets keep going into protect mode when I try to turn it up. My deck is capable of turning up to 50 and with everything running I never go over 35. As soon as I hit 29-30 there goes the tweets. The slope/switch on the crossover is at 0 with a +3 to -3 option. I've even tried After you turn down the volume they come back on. If I turn the power of the amp down to where they don't shut off my POS stock speakers running off the deck are almost as loud as the CDT's. With everything turned up with the 175 watts going to them the mids sound really good and that is what gets me. I've tried everything from running them at HP to start off with, switched them to full, to adjusting the amp with a max of 30 on the volume, to trying everything on my deck. Needless to say I've tried just about everything I can think of. I've ran out of ideas so I'm begging for someone to help out this semi-noobie get his chit straight. Thanks in advance!! [/QUOTE]

Verification