Reply to thread

Message

<blockquote data-quote="GodFatherGrafix" data-source="post: 2089958" data-attributes="member: 570184">Is there 2 holes in the dash plate on each side of the radio?&nbsp; Maybe those holes on each side of the coin and cup holders? My car has like an oval piece that holds the radio and has the heat &amp;amp; A/C controls on it too.&nbsp; That is how my &#039;97 Taurus is designed, and the Taurus and Sable are exactly the same car, for the most part anyway.If there is the 2 holes(one above the other, so they are positioned in a straight line vertically. Know what I mean?) on each side, you have to make or buy a tool.&nbsp; I made mine out of a metal coat hanger.&nbsp; You make it into a U shape, so it slides into both holes on the 1 side at the same time.&nbsp; I filed little notches about 1/4&quot; or less from the end of all 4 ends but I dont really think its necessary.&nbsp; Anyway, you slide these into both sides (all 4 holes) at the same time, and the whole oval dash piece pops out.&nbsp; When you slide it in, it will release the clips. You&#039;ll feel/see it happen as you push them in.&nbsp; You may have to play with it a little, adjusting the position/depth they are pushed in.Just make sure that the long straight sides of each U are at least 2 1/2 - 3&quot; long.</blockquote>

[QUOTE="GodFatherGrafix, post: 2089958, member: 570184"] Is there 2 holes in the dash plate on each side of the radio? Maybe those holes on each side of the coin and cup holders? My car has like an oval piece that holds the radio and has the heat & A/C controls on it too. That is how my '97 Taurus is designed, and the Taurus and Sable are exactly the same car, for the most part anyway. If there is the 2 holes(one above the other, so they are positioned in a straight line vertically. Know what I mean?) on each side, you have to make or buy a tool. I made mine out of a metal coat hanger. You make it into a U shape, so it slides into both holes on the 1 side at the same time. I filed little notches about 1/4" or less from the end of all 4 ends but I dont really think its necessary. Anyway, you slide these into both sides (all 4 holes) at the same time, and the whole oval dash piece pops out. When you slide it in, it will release the clips. You'll feel/see it happen as you push them in. You may have to play with it a little, adjusting the position/depth they are pushed in. Just make sure that the long straight sides of each U are at least 2 1/2 - 3" long. [/QUOTE]

Verification