Reply to thread

Message

<blockquote data-quote="subzero" data-source="post: 5946407" data-attributes="member: 600350">I know this is old, but my Sony is doing this chit too.&nbsp; I found this:FAILURE (Illuminates until any button is pressed.)The connection of speakers/amplifiers is incorrect.---+ See the installation/connections manual of thismodel to check the connection.FAILURE (Illuminates for about I second.) (CDXGT320/GT32Wonly)When the SAT tuner is connected, storing an SATradio channel into a preset failed.---+ Be sure to receive the channel that you want tostore, then try it again.LOAD (CDX-GT320/GT32WI dont know how this makes any sense.&nbsp; I caped off my speaker outputs because I am running RCA to amps.&nbsp; I am wondering if Sony deck needs to have speaker hooked up directly to function properly.?&nbsp; Please tell me your thoughts on this.&nbsp; I get the failure warning with the AUX , and CD.</blockquote>

[QUOTE="subzero, post: 5946407, member: 600350"] I know this is old, but my Sony is doing this chit too. I found this: FAILURE (Illuminates until any button is pressed.) The connection of speakers/amplifiers is incorrect. ---+ See the installation/connections manual of this model to check the connection. FAILURE (Illuminates for about I second.) (CDXGT320/ GT32Wonly) When the SAT tuner is connected, storing an SAT radio channel into a preset failed. ---+ Be sure to receive the channel that you want to store, then try it again. LOAD (CDX-GT320/GT32W I dont know how this makes any sense. I caped off my speaker outputs because I am running RCA to amps. I am wondering if Sony deck needs to have speaker hooked up directly to function properly.? Please tell me your thoughts on this. I get the failure warning with the AUX , and CD. [/QUOTE]

Verification