Reply to thread

Message

<blockquote data-quote="60ndown" data-source="post: 2911879" data-attributes="member: 561488">1.Install is more important than equipment.2.Your power delivery is only as good as your ground path.3.You can fuse your power wire according to the needs of the amp or the size of the wire.4.Speakers do not need an amp capable of delivering the RMS rating of the speaker to sound good. That goes for subs, too.5.Ported is not always louder or less accurate than sealed.6, Garbage in garbage out7, You can never blow a sub with to little power.(but clipping t signal may damage it)8 You can never have to big of wire.99, Adding subs or adding power will NOT guarantee a rise in SPL10, SQ is better than spl always.11. Avoid multiple ground paths when grounding audio equipment to prevent a ground loop.if you guys can copy paste it would save me doing it</blockquote>

[QUOTE="60ndown, post: 2911879, member: 561488"] 1.Install is more important than equipment. 2.Your power delivery is only as good as your ground path. 3.You can fuse your power wire according to the needs of the amp or the size of the wire. 4.Speakers do not need an amp capable of delivering the RMS rating of the speaker to sound good. That goes for subs, too. 5.Ported is not always louder or less accurate than sealed. 6, Garbage in garbage out 7, You can never blow a sub with to little power.(but clipping t signal may damage it) 8 You can never have to big of wire.9 9, Adding subs or adding power will NOT guarantee a rise in SPL 10, SQ is better than spl always. 11. Avoid multiple ground paths when grounding audio equipment to prevent a ground loop. if you guys can copy paste it would save me doing it [/QUOTE]

Verification