Reply to thread

Message: <blockquote data-quote="Dub7sonoma" data-source="post: 8326097" data-attributes="member: 649968">I would do at least 2 runs of 1/0 from rear battery bank to the frame since you wont be using as many batteries. And you should be fine with the big three up front as longs as there are 2 runs of 1/0 positive and 2 negative from front to back.I you look at the pic, I made sure my buss bars didn't go all the way to the outside edge of the batteries, just in case they did slide a little, nothing would be able to short against the truck. But the batteries weigh 65lbs each so all together almost 500lbs. They don't really move at all that I have noticed. I also have a rubber bed mat, so I'm sure that helps a lot.And no problem with the questions. I don't mind helping... after all that whats the forums are for anyways.</blockquote>

Top