Reply to thread

Message

<blockquote data-quote="rtillaree" data-source="post: 2964140" data-attributes="member: 570661">not too much going on right now, i&#039;ve got the interior out, just finished cleaning everything with acetone, and everything is taped off now.im actually heading to home depot to get a few 2&quot; rollers for the spectrum spray. im going to see how it works painting it on before i have to go out and buy an undercoating spray gun...but im thinking that it should be fine, plus im going to cover the first layer(s) of spectrum with a few layers of fatmat, it should be good to go...these were taken before the vacuuming and acetone wash...nothing special yet...<img src="http://img118.imageshack.us/img118/8842/dsc06393smallnf8.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="http://img125.imageshack.us/img125/9853/dsc06394smallpy0.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="http://img125.imageshack.us/img125/294/dsc06395smallst2.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />and as you can see the package tray is gone and i cut a port hole there, i am fabricating a new package tray out of 3/4 blondewood and im also making up a fiberglass port...will also be making new speaker enclosures for the rear which will point my new CDT&#039;s towards the front...once the sound deadening is complete, i am hoping to ride out to Tampa to meet up with Robin so we can construct a enclosure for my 2 mx&#039;s and some housing for the amps...so when all is done i should have 2 12&quot; re mx&#039;s off a memphis 4kw @ 2ohms, my boston z6&#039;s (front) and the CDT CFI&#039;s (rear) off my JBL px300.4.... not the most spectacular setup, but im anticipating it&#039;s completion...</blockquote>

[QUOTE="rtillaree, post: 2964140, member: 570661"] not too much going on right now, i've got the interior out, just finished cleaning everything with acetone, and everything is taped off now. im actually heading to home depot to get a few 2" rollers for the spectrum spray. im going to see how it works painting it on before i have to go out and buy an undercoating spray gun...but im thinking that it should be fine, plus im going to cover the first layer(s) of spectrum with a few layers of fatmat, it should be good to go... these were taken before the vacuuming and acetone wash...nothing special yet... [IMG]http://img118.imageshack.us/img118/8842/dsc06393smallnf8.jpg[/IMG] [IMG]http://img125.imageshack.us/img125/9853/dsc06394smallpy0.jpg[/IMG] [IMG]http://img125.imageshack.us/img125/294/dsc06395smallst2.jpg[/IMG] and as you can see the package tray is gone and i cut a port hole there, i am fabricating a new package tray out of 3/4 blondewood and im also making up a fiberglass port...will also be making new speaker enclosures for the rear which will point my new CDT's towards the front... once the sound deadening is complete, i am hoping to ride out to Tampa to meet up with Robin so we can construct a enclosure for my 2 mx's and some housing for the amps... so when all is done i should have 2 12" re mx's off a memphis 4kw @ 2ohms, my boston z6's (front) and the CDT CFI's (rear) off my JBL px300.4.... not the most spectacular setup, but im anticipating it's completion... [/QUOTE]

Verification