Reply to thread

Message: <blockquote data-quote="Buck" data-source="post: 8780249" data-attributes="member: 591582"><p>Test cutting the brace.  I designed this; I can change it whenever I want.  All I do is change whatever and the CNC will cut it.  The sub motor goes through the big open hole, and the sub is completely centered in the box from left to right.  So, the brace is offset compared to the sub, because the box has a port that takes up internal width on one side.  The pattern is a true geometrical pattern, so it wound up needing different circumstances for both sides the windows brace to be strong.  I designed all of that, and it was designed that way for reasons.</p></blockquote><p></p>

Top