Reply to thread

Message: <blockquote data-quote="Lil Poot" data-source="post: 5659770" data-attributes="member: 561892">teampsi can get them for you, or i have a few laying around.its a tedious process, you have to carefully cut the dustcap off, heat up the solder attaching the tinsel to the voice coil lead, which is extremely fragile. if you bend the voice coil lead around too much, you'll break it off and be shit out of luck. once its off, soldering the tinsel to the coil lead, putting it through the hole in the cone, gluing the inside and outside of the hole, gluing the dustcap back on, cutting the tinsel to length and soldering it to the terminal isnt all that difficult, its just that one step you have to be extremely careful with.</blockquote>

Top