Reply to thread

Message: <blockquote data-quote="mast240" data-source="post: 7435806" data-attributes="member: 631695">that is the last part of it... you need to make sure that your sub is wired correctly, to four ohms, like the schematic in your previous post shows... if your not subscribed, then you can click on your user name on this post, and then click "view thread posts" from the drop down... it will be in therechecking to make sure your sub is wired properly is the most important step tho, cuz if you don't, and its wired down to 1 ohm, you could damage, or even destroy your amp</blockquote>

Top