Reply to thread

Message: <blockquote data-quote="bootleg" data-source="post: 46745" data-attributes="member: 542013"><p>As far as rounded edges go, there is not a large improvement but there is some.  What you can do is pour some fiber resin, bondo or just some glue and stand it up on the corner, that'll give it a nice round corner.  Fiber glassing is as good as it is thick and it's composition, the thicker it is, the stiffer (duh) but it also depends on how much hardener you put in the batch.  I sudgest laying two or three layers down to the shape and then soking strips and applying them or you can just pour it on the inside so it dries very thick, I found that method very quick to do opposed to sitting there and trying to paint every frickin' layer on.  Good Luck.  bootleg</p></blockquote><p></p>

Top