Reply to thread

Message

<blockquote data-quote="Rcn11thacr" data-source="post: 8795625" data-attributes="member: 683310">I am building this box this morning and would appreciate if someone would lend me a hand with figuring out what this box is tuned to and what the exact internal dimensions are?I have 4 S8L7 4 ohm dvc solo baric’s&nbsp; planned for a 94 K1500 single cab and I would appreciate if someone could check out my box in a software program. The subs will be down firing behind the seat, 2 per side, with the amps mounted in the middle of the box.MDF is .765 ODAll measurements in picture of box are external.Individually sub/sealed enclosure.Listening interests- Bass, heavy metal, country.96 lbs of sound deadener in cab, Big 3 +, dual 1/0 power, single 4/0 ground to the frame. Working on a dual alternator bracket now. Subs will be powered by a CXA 1800.1Would someone mind putting this in a program and letting me know what the outcome is? If I measured correctly, I believe I have .0.620 Cu Ft per enclosure. I would be interested in knowing what the program says?If I missed providing any information, please let me know. Any thoughts would be helpful also. Thank you.</blockquote>

[QUOTE="Rcn11thacr, post: 8795625, member: 683310"] I am building this box this morning and would appreciate if someone would lend me a hand with figuring out what this box is tuned to and what the exact internal dimensions are? I have 4 S8L7 4 ohm dvc solo baric’s planned for a 94 K1500 single cab and I would appreciate if someone could check out my box in a software program. The subs will be down firing behind the seat, 2 per side, with the amps mounted in the middle of the box. MDF is .765 OD All measurements in picture of box are external. Individually sub/sealed enclosure. Listening interests- Bass, heavy metal, country. 96 lbs of sound deadener in cab, Big 3 +, dual 1/0 power, single 4/0 ground to the frame. Working on a dual alternator bracket now. Subs will be powered by a CXA 1800.1 Would someone mind putting this in a program and letting me know what the outcome is? If I measured correctly, I believe I have .0.620 Cu Ft per enclosure. I would be interested in knowing what the program says? If I missed providing any information, please let me know. Any thoughts would be helpful also. Thank you. [/QUOTE]

Verification