Reply to thread

Message

<blockquote data-quote="jstaguy24" data-source="post: 8401274" data-attributes="member: 572670">Anyone willing to model a box for me?? I recently moved, computer is in storage. I Just bought this CT sounds strato 12. Have intentions of buying a second one and building a box for the pair. I picked up a really cheap prefab box with the sub for temporary use until I buy the second sub. I&#039;m not really happy with the sq or output. I know a lot of it is probably the box, but I would like to test it in a properly sized and tuned ported box to determine whether I&#039;m going to buy the second one, or go a different route. Any assistance would be greatly appreciatedTECHNICAL SPECSRatings&nbsp; &nbsp; 600w rms | 1200w maxCoil Size&nbsp; &nbsp; 3″Xmax&nbsp; &nbsp; 12.5mmT/S PARAMETERSDual 4 OhmFs&nbsp; &nbsp; 37.554 HzQts&nbsp; &nbsp; 0.558Qes&nbsp; &nbsp; 0.683Qms&nbsp; &nbsp; 4.259Vas&nbsp; &nbsp; 42.762SPL&nbsp; &nbsp; 87.1 dBBOX SPECSSealed&nbsp; &nbsp; 0.75 ft^3Ported&nbsp; &nbsp; 1.5 ft^3DIMENSIONSOverall Diameter&nbsp; &nbsp; 12.6″Cutout Diameter&nbsp; &nbsp; 11.2″Mounting Depth&nbsp; &nbsp; 6.0″Displacement</blockquote>

[QUOTE="jstaguy24, post: 8401274, member: 572670"] Anyone willing to model a box for me?? I recently moved, computer is in storage. I Just bought this CT sounds strato 12. Have intentions of buying a second one and building a box for the pair. I picked up a really cheap prefab box with the sub for temporary use until I buy the second sub. I'm not really happy with the sq or output. I know a lot of it is probably the box, but I would like to test it in a properly sized and tuned ported box to determine whether I'm going to buy the second one, or go a different route. Any assistance would be greatly appreciated TECHNICAL SPECS Ratings 600w rms | 1200w max Coil Size 3″ Xmax 12.5mm T/S PARAMETERS Dual 4 Ohm Fs 37.554 Hz Qts 0.558 Qes 0.683 Qms 4.259 Vas 42.762 SPL 87.1 dB BOX SPECS Sealed 0.75 ft^3 Ported 1.5 ft^3 DIMENSIONS Overall Diameter 12.6″ Cutout Diameter 11.2″ Mounting Depth 6.0″ Displacement [/QUOTE]

Verification