Reply to thread

Message: <blockquote data-quote="marcotheclepto" data-source="post: 6929044" data-attributes="member: 607651"><p>2 things firstly 13.5x1.875 is too small a port. try something in the ballpark of 3.75-4 inches wide. will be more sufficient port area. this should drastically change the required length. secondly that other tab you have open, the 12 volt .com is a wonderful resource. if you have any questions or would like one of those "$5 designs" let me know via PM id be more than gald to help you or do a design.</p></blockquote><p></p>

Top