Reply to thread

Message

<blockquote data-quote="07BronzeFuz" data-source="post: 6031849" data-attributes="member: 608474">guys, I plan on getting 2 12&quot; es12d PBX extreme&#039;s. These are the old school ones. I plan on porting the box but dont want to go over 4cu ft. I just dont think I can fit a slot port in it. I did the one on re&#039;s web site but dont know how wide I the port can be. I have seen some slot ports like 2&quot; wide and some 6&quot; wide. I need as little port in the box so it will not take up some much air space. Here are some spec on the woofers.RMS Power Handling : 450 WattsPeak Power Handling : 900 WattsFrequency Response : 20Hz - 500HzSensitivity : 89.9dB @ 1W/1MMounting Depth : 5.75&quot; (133mm)Cut-Out Diameter : 11.37&quot; (289mm)PARAMETERSFs : 29HzQms :&nbsp; 6.1Vas : (Liters) 76.4Qms :&nbsp; 6.1Qes :&nbsp; .43Qts :&nbsp; .40Nominal Imp (Ohms) : 4 ohms + 4 ohmsSPL 1w/1m (dB) : 89.9SPL (2.83V/1m) : 95.1X-Max (mm) one way : 9Pe - RMS : 450 WattsPe - Maximum : 900 Watts</blockquote>

[QUOTE="07BronzeFuz, post: 6031849, member: 608474"] guys, I plan on getting 2 12" es12d PBX extreme's. These are the old school ones. I plan on porting the box but dont want to go over 4cu ft. I just dont think I can fit a slot port in it. I did the one on re's web site but dont know how wide I the port can be. I have seen some slot ports like 2" wide and some 6" wide. I need as little port in the box so it will not take up some much air space. Here are some spec on the woofers. RMS Power Handling : 450 Watts Peak Power Handling : 900 Watts Frequency Response : 20Hz - 500Hz Sensitivity : 89.9dB @ 1W/1M Mounting Depth : 5.75" (133mm) Cut-Out Diameter : 11.37" (289mm) PARAMETERS Fs : 29Hz Qms : 6.1 Vas : (Liters) 76.4 Qms : 6.1 Qes : .43 Qts : .40 Nominal Imp (Ohms) : 4 ohms + 4 ohms SPL 1w/1m (dB) : 89.9 SPL (2.83V/1m) : 95.1 X-Max (mm) one way : 9 Pe - RMS : 450 Watts Pe - Maximum : 900 Watts [/QUOTE]

Verification