Reply to thread

Message

<blockquote data-quote="kfx450r" data-source="post: 6348043" data-attributes="member: 588271">Should have this thing in my hands and ready to use within the next 2 or so weeks. Trying to figure out what kinda box to make. Their site is confusing as hell they have all kinda sizes recommended for it for homes/cars etc could anyone tell me whats the best size boxes these like ported, want it slam the lows but I also dont want it to **** at midbass either, but if i had to sacrafice one itd be the mids. Thinkin around like 32-34 hz tuning.Most likely going to be running it on a SAE-1200D at 2 ohms, rated at 600rms but i will set the gain accordingly.EBS (car) / Vented0.4 cu ft netTuned to 30 Hz15 sq. in. of Vent Area--------------------------------This one seems like the only one that makes sense, but even for an 8..this 8 atleast, 0.4 ported? seems pretty **** small, dont E8s call for 0.6 ported.</blockquote>

[QUOTE="kfx450r, post: 6348043, member: 588271"] Should have this thing in my hands and ready to use within the next 2 or so weeks. Trying to figure out what kinda box to make. Their site is confusing as hell they have all kinda sizes recommended for it for homes/cars etc could anyone tell me whats the best size boxes these like ported, want it slam the lows but I also dont want it to **** at midbass either, but if i had to sacrafice one itd be the mids. Thinkin around like 32-34 hz tuning. Most likely going to be running it on a SAE-1200D at 2 ohms, rated at 600rms but i will set the gain accordingly. EBS (car) / Vented 0.4 cu ft net Tuned to 30 Hz 15 sq. in. of Vent Area -------------------------------- This one seems like the only one that makes sense, but even for an 8..this 8 atleast, 0.4 ported? seems pretty **** small, dont E8s call for 0.6 ported. [/QUOTE]

Verification