Reply to thread

Message

<blockquote data-quote="shredder2" data-source="post: 8825069" data-attributes="member: 674047">In that space you listed this is the best I could come up with quick and dirty. It&#039;s small airspace-wise but is the tuning you want. A Zcon-12 is pretty beastly and to do it right I&#039;d find more space, build it beefier and tune it a little different. This is single .75&quot; materials only. The sub basket will protrude past the baffle edges slightly and the cutout may bite slightly into the front/rear panels if the cutout is over 11&quot; which it probably is (11.125&quot;-11.25&quot;). Is it optimum?.. no. Will it work?.. yes. The only thing I&#039;d add is a dowel to brace the front/rear panels .<img src="https://snipboard.io/VCBAgP.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />I&#039;d do somewhere around 2.25ft3 net /w/ 35-40in2 of port tuned around 34hz myself. Double baffled and braced it would be much larger than this quick and small design.</blockquote>

[QUOTE="shredder2, post: 8825069, member: 674047"] In that space you listed this is the best I could come up with quick and dirty. It's small airspace-wise but is the tuning you want. A Zcon-12 is pretty beastly and to do it right I'd find more space, build it beefier and tune it a little different. This is single .75" materials only. The sub basket will protrude past the baffle edges slightly and the cutout may bite slightly into the front/rear panels if the cutout is over 11" which it probably is (11.125"-11.25"). Is it optimum?.. no. Will it work?.. yes. The only thing I'd add is a dowel to brace the front/rear panels . [IMG]https://snipboard.io/VCBAgP.jpg[/IMG] I'd do somewhere around 2.25ft3 net /w/ 35-40in2 of port tuned around 34hz myself. Double baffled and braced it would be much larger than this quick and small design. [/QUOTE]

Verification