Reply to thread

Message

<blockquote data-quote="digitalrainman" data-source="post: 4099780" data-attributes="member: 577603">Ok i just read around and found the RE enclosure calculator, so i decided to use it, does this look good to you guys, or is it too long and to shallow for a good ported.&nbsp; I went off a tuning of 35 as recommended by some people, if this is wrong mention it also please.Eww, just looked at the image, its too small to see anything, ill type out dimensions.Box width: 44Box height: 14Box top depth: 7Box bottom depth: 9Wood thickness: .75Square port height: 12.5Square port width: 1.5Square port length 1: 5.75Square port length 2: 11Total port length: 19.75Square port diameter: 4.88602Square port area: 18.75Square port volume internal: 370.3125Square port volume displaced: 382.3125Box volume: 1.777Tuned frequency: 34.9039</blockquote>

[QUOTE="digitalrainman, post: 4099780, member: 577603"] Ok i just read around and found the RE enclosure calculator, so i decided to use it, does this look good to you guys, or is it too long and to shallow for a good ported. I went off a tuning of 35 as recommended by some people, if this is wrong mention it also please. Eww, just looked at the image, its too small to see anything, ill type out dimensions. Box width: 44 Box height: 14 Box top depth: 7 Box bottom depth: 9 Wood thickness: .75 Square port height: 12.5 Square port width: 1.5 Square port length 1: 5.75 Square port length 2: 11 Total port length: 19.75 Square port diameter: 4.88602 Square port area: 18.75 Square port volume internal: 370.3125 Square port volume displaced: 382.3125 Box volume: 1.777 Tuned frequency: 34.9039 [/QUOTE]

Verification