Reply to thread

Message

<blockquote data-quote="BLD 25" data-source="post: 2968191" data-attributes="member: 563837">Alright, i have a tough one.&nbsp; I have a dodge intrepid, and the speaker shelf hangs pretty low.&nbsp; It gives me 14.5&quot; between the floor and the bottom of the shelf.&nbsp; I just bought an idq 15 which has the specs here:<a href="http://www.imagedynamicsusa.com/tech_page.php?name=IDQ15D2%20V.2&amp;amp;type=sub&amp;amp;id=idq" target="_blank">http://www.imagedynamicsusa.com/tech_page.php?name=IDQ15D2%20V.2&amp;amp;type=sub&amp;amp;id=idq</a><a href="http://www.imagedynamicsusa.com/spec.php?type=encspec&amp;amp;id=IDQ15D2%20V.2" target="_blank">http://www.imagedynamicsusa.com/spec.php?type=encspec&amp;amp;id=IDQ15D2%20V.2</a>I wanted to do about 2.5 cuft gross with a 4&quot; port like they recommend.&nbsp; That isn&#039;t one of the three choices, so about how long should the port be?&nbsp; I am fairly sure about the round port since it takes up so much less space than a slot port, and the idq isn&#039;t a rediculously high excursion driver.The biggest challenge is fitting a 15 in the aforementioned space.&nbsp; What i thought is that i could have the box come out a little in front of the shelf, and then double the face so i have a little more room for the speaker to taper in.&nbsp; The cutout is less than 14&quot; so this should work.&nbsp; Any suggestions?Thanks!</blockquote>

[QUOTE="BLD 25, post: 2968191, member: 563837"] Alright, i have a tough one. I have a dodge intrepid, and the speaker shelf hangs pretty low. It gives me 14.5" between the floor and the bottom of the shelf. I just bought an idq 15 which has the specs here: [URL="http://www.imagedynamicsusa.com/tech_page.php?name=IDQ15D2%20V.2&type=sub&id=idq"]http://www.imagedynamicsusa.com/tech_page.php?name=IDQ15D2%20V.2&type=sub&id=idq[/URL] [URL="http://www.imagedynamicsusa.com/spec.php?type=encspec&id=IDQ15D2%20V.2"]http://www.imagedynamicsusa.com/spec.php?type=encspec&id=IDQ15D2%20V.2[/URL] I wanted to do about 2.5 cuft gross with a 4" port like they recommend. That isn't one of the three choices, so about how long should the port be? I am fairly sure about the round port since it takes up so much less space than a slot port, and the idq isn't a rediculously high excursion driver. The biggest challenge is fitting a 15 in the aforementioned space. What i thought is that i could have the box come out a little in front of the shelf, and then double the face so i have a little more room for the speaker to taper in. The cutout is less than 14" so this should work. Any suggestions? Thanks! [/QUOTE]

Verification