Reply to thread

Message: <blockquote data-quote="Pioneer~Saturn" data-source="post: 4910662" data-attributes="member: 569334">With that port you will not have port noise...especially if you round over the port opening and ending...and also round over the turn in the port and put a 45 degree insert in the corner where the port bends..The width really doesnt have much to do with the port unless you start to get into the 9:1 ratio of height-width....then you get into issues.With what I gave you, you shouldnt have any issues (especially if you round over the edges and put 45 degree inserts into the corners to help out flow and also strengthen the corners)</blockquote>

Top