Reply to thread

Message

<blockquote data-quote="hotcress" data-source="post: 7617433" data-attributes="member: 608072">I&#039;ve been trying for quite some time to come up with a design to make this sub pound. There isn&#039;t much info out there on a proper enclosure. I did build a 2.2cf3 slot ported box for it tuned to 32hz. The sub sounded good on 900 watts, but behaved like it needed a smaller enclosure. Based on that experience I&#039;d like to tune it higher. Maybe 36hz. I know they didn&#039;t recommend bandpass boxes, but since it looks like the right box is going to be an experiment, hey you never know. Least I would have to worry about buzzing from my trunk. I don&#039;t mind paying for the info. ---------- Post added at 02:11 PM ---------- Previous post was at 02:10 PM ---------- Help me out please.</blockquote>

[QUOTE="hotcress, post: 7617433, member: 608072"] I've been trying for quite some time to come up with a design to make this sub pound. There isn't much info out there on a proper enclosure. I did build a 2.2cf3 slot ported box for it tuned to 32hz. The sub sounded good on 900 watts, but behaved like it needed a smaller enclosure. Based on that experience I'd like to tune it higher. Maybe 36hz. I know they didn't recommend bandpass boxes, but since it looks like the right box is going to be an experiment, hey you never know. Least I would have to worry about buzzing from my trunk. [B]I don't mind paying for the info.[/B] [COLOR=Silver] [/COLOR] [COLOR=Silver][SIZE=8px]---------- Post added at 02:11 PM ---------- Previous post was at 02:10 PM ----------[/SIZE][/COLOR][SIZE=8px][/SIZE] [COLOR=Silver] [/COLOR] Help me out please. [/QUOTE]

Verification