Reply to thread

Message

<blockquote data-quote="ThxOne" data-source="post: 8678958" data-attributes="member: 675210">For your head unit JVC KW-R930BTSPair and connect a Bluetooth device for the first time:1. Press to turn on the unit.2. Search and select “KW-R9BTS”/“KW-X8BTS”/“KW-SX8BTS” on the Bluetooth device.&nbsp; &nbsp; &nbsp; &nbsp; “BT PAIRING” flashes on the display.•&nbsp; For some Bluetooth devices, you may need to enter the Personal Identification Number (PIN) code immediately after searching.3. Perform (A) or (B) depending on what appears on the display.&nbsp; &nbsp; &nbsp; &nbsp; For some Bluetooth devices, pairing sequence may vary from the steps described below.(A) “[Device Name]”&nbsp; “XXXXXX”&nbsp; “VOL – YES”&nbsp; “BACK – NO”&nbsp; &nbsp; &nbsp; &nbsp; “XXXXXX” is a 6-digit passkey randomly generated during each pairing.&nbsp;&nbsp; Ensure that the passkeys appear on the unit and Bluetooth device are the same.&nbsp;&nbsp; Press the volume knob to confirm the passkey.&nbsp;&nbsp; Operate the Bluetooth device to confirm the passkey.(B)&nbsp; “[Device&nbsp; Name]”&nbsp;&nbsp; “VOL – YES”&nbsp; “BACK – NO”&nbsp;&nbsp; Press the volume knob to start pairing. •&nbsp;&nbsp; If&nbsp;&nbsp; “PAIRING”&nbsp; &nbsp; “PIN 0000” scrolls on the display, enter the PIN code “0000” into the Bluetooth device. You can change to a desired PIN code before pairing. ( 19)•&nbsp; If only “PAIRING” appears, operate the Bluetooth device to confirm pairing.“PAIRING COMPLETED” appears when pairing is completed and “” will light up when the Bluetooth connection is established.•&nbsp; This unit supports Secure Simple Pairing (SSP).•&nbsp; Up to five devices can be registered (paired) in total.•&nbsp; Once the pairing is completed, the Bluetooth device will remain registered in the unit even if you reset the unit. To delete the paired device,&nbsp; 19, [DEVICE DELETE].•&nbsp; A maximum of two Bluetooth phones and one Bluetooth audio device can be connected at any time. &nbsp;&nbsp; However, while in BT AUDIO source, you can connect to five Bluetooth audio devices and switch between these five devices. ( 20)•&nbsp; Some Bluetooth devices may not automatically connect to the unit after pairing. Connect the device to the unit manually.•</blockquote>

[QUOTE="ThxOne, post: 8678958, member: 675210"] For your head unit [B]JVC KW-R930BTS Pair and connect a Bluetooth device for the first time:[/B] 1. Press to turn on the unit. 2. Search and select “KW-R9BTS”/“KW-X8BTS”/“KW-SX8BTS” on the Bluetooth device. “BT PAIRING” flashes on the display.• For some Bluetooth devices, you may need to enter the Personal Identification Number (PIN) code immediately after searching. 3. Perform (A) or (B) depending on what appears on the display. For some Bluetooth devices, pairing sequence may vary from the steps described below.(A) “[Device Name]” “XXXXXX” “VOL – YES” “BACK – NO” “XXXXXX” is a 6-digit passkey randomly generated during each pairing. Ensure that the passkeys appear on the unit and Bluetooth device are the same. Press the volume knob to confirm the passkey. Operate the Bluetooth device to confirm the passkey.(B) “[Device Name]” “VOL – YES” “BACK – NO” Press the volume knob to start pairing. • If “PAIRING” “PIN 0000” scrolls on the display, enter the PIN code “0000” into the Bluetooth device. You can change to a desired PIN code before pairing. ( 19)• If only “PAIRING” appears, operate the Bluetooth device to confirm pairing.“PAIRING COMPLETED” appears when pairing is completed and “” will light up when the Bluetooth connection is established.• [B][U]This unit supports Secure Simple Pairing (SSP).• Up to five devices can be registered (paired) in total.• Once the pairing is completed, [SIZE=6]the Bluetooth device will remain registered in the unit even if you reset the unit[/SIZE]. To delete the paired device, 19, [DEVICE DELETE].• A maximum of two Bluetooth phones and one Bluetooth audio device can be connected at any time. [/U][/B] However, while in BT AUDIO source, you can connect to five Bluetooth audio devices and switch between these five devices. ( 20)• Some Bluetooth devices may not automatically connect to the unit after pairing. Connect the device to the unit manually.• [/QUOTE]

Verification