Reply to thread

Message: <blockquote data-quote="cyn" data-source="post: 7822342" data-attributes="member: 635432"><p>As I said this is the first box I've had the Issue with coming apart at the seams but I have done every box the same.. One Piece at a time let dry for 3-4 hours then do the next Piece. Pre Drill all holes for the screws etc...   I have had 3 MDF boxes where Screws would basically pull out with the sub. <a href="http:////forums/usertag.php?do=list&amp;action=hash&amp;hash=8wood" target="_blank">#8wood</a>  screws 1.5" long , And have had 1 box that I used all threads on and it basically pulled the washer &amp; nut halfway through the MDF...   But 4 boxes out of 30 or so isn't that bad of an Issue as It could of been bad wood from the shop or User Error / Moisture Buildup or something else..</p></blockquote><p></p>

Top