Reply to thread

Message

<blockquote data-quote="bose301s" data-source="post: 4530456" data-attributes="member: 575773">All true, I guess with the speed issue as I stated it would be more of an effect of severely reduced BL. If the field strength isn&#039;t strong enough to overcome the forces of the suspension then the cone slows down before the signal tells it to return. I do know the new Mag has a fully copper anodized pole piece and I believe the rebate in the top plate for the XBL^2 design is also filled with copper. As for inductors and induction, I am studying to be an EE so I do know a bit about that as well as electromagnetics //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif As for the eddy currents, you will still get them in the copper, it is impossible to not get them as long as there is a metal and a moving magnetic field eddy currents will be produced. As for power compression, if you still use a good coil and are aware of its limits then it&#039;s not a particularly large factor. Also, if the sensitivity id high enough it will be able to get loud enough before full power handling is reached anyway. I mean, with the combination of sensitivity and power handling, who cares if a driver only handles 1000 watts thermally if it only needs 500 to get to full output anyway, you will never reach power compression and will still have all of the output you need.Your drivers definitely look to be high quality, but I could never buy anything from a company from Green Bay //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif Go Lions! lol</blockquote>

[QUOTE="bose301s, post: 4530456, member: 575773"] All true, I guess with the speed issue as I stated it would be more of an effect of severely reduced BL. If the field strength isn't strong enough to overcome the forces of the suspension then the cone slows down before the signal tells it to return. I do know the new Mag has a fully copper anodized pole piece and I believe the rebate in the top plate for the XBL^2 design is also filled with copper. As for inductors and induction, I am studying to be an EE so I do know a bit about that as well as electromagnetics [IMG]//content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif[/IMG] As for the eddy currents, you will still get them in the copper, it is impossible to not get them as long as there is a metal and a moving magnetic field eddy currents will be produced. As for power compression, if you still use a good coil and are aware of its limits then it's not a particularly large factor. Also, if the sensitivity id high enough it will be able to get loud enough before full power handling is reached anyway. I mean, with the combination of sensitivity and power handling, who cares if a driver only handles 1000 watts thermally if it only needs 500 to get to full output anyway, you will never reach power compression and will still have all of the output you need. Your drivers definitely look to be high quality, but I could never buy anything from a company from Green Bay [IMG]//content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif[/IMG] Go Lions! lol [/QUOTE]

Verification