Reply to thread

Message

<blockquote data-quote="wolfey" data-source="post: 66816" data-attributes="member: 544404">yeah that would be a wayyyy better setup to have 2 of those subs in a ported box with a 600.1 rather than a 300.1 with 1 sub in a sealed box.. Otherwise i&#039;d say run 1 sub ported with the 600.1, or maybe even with&nbsp; the 300.1 cus then you wont need the extra power since you usually need less power for a ported system.The jbl 1200.1 is capable of running at 1 ohm but it gets hot.. so i believe the 600.1 would also.. If you ran them both at two ohms and in parallel that would give 1 ohm.&nbsp; Or you could get a different amp altogether.. i dont know which one though.. dont get the amp i have cus it puts out hella power and you could blow your subs ilke i keep doing..&nbsp; GRR dont remind me.. i&#039;m sick of popping noises. Well if you ran&nbsp; your system at 4 ohms you would be ok but that would be kinda pointless except sq would be better.. less power though..</blockquote>

[QUOTE="wolfey, post: 66816, member: 544404"] yeah that would be a wayyyy better setup to have 2 of those subs in a ported box with a 600.1 rather than a 300.1 with 1 sub in a sealed box.. Otherwise i'd say run 1 sub ported with the 600.1, or maybe even with the 300.1 cus then you wont need the extra power since you usually need less power for a ported system. The jbl 1200.1 is capable of running at 1 ohm but it gets hot.. so i believe the 600.1 would also.. If you ran them both at two ohms and in parallel that would give 1 ohm. Or you could get a different amp altogether.. i dont know which one though.. dont get the amp i have cus it puts out hella power and you could blow your subs ilke i keep doing.. GRR dont remind me.. i'm sick of popping noises. Well if you ran your system at 4 ohms you would be ok but that would be kinda pointless except sq would be better.. less power though.. [/QUOTE]

Verification