Reply to thread

Message: <blockquote data-quote="Miller" data-source="post: 244522" data-attributes="member: 543408"><p>I'm pretty confused with this end correction so Let me just ask this... My box is 3.3 Cubic feet that will be housing 2 12" SE's.   I want to tune it to 35 Hz using a slot port.   The slot port with be 14.6 inches high and 2 inches wide.  On Win Isd it says the port length should be about 15" long.   My box is only 14" deep.   So I would have the port run first along the side then bend and run along the back a little bit......How long should it run along the back??</p></blockquote><p></p>

Top