Reply to thread

Message

<blockquote data-quote="kai_" data-source="post: 2005952" data-attributes="member: 569644">I was just going over the install manuals for the diamond components and had a look again at the crossover wiring and I noticed this:<img src="http://img328.imageshack.us/img328/1517/crossoverszv8.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />I presume that this means that it&#039;s possible to use the remaining connections for rear speakers that are connected directly to the head unit in my above diagram? If so, my revised install would look like this:<img src="http://img451.imageshack.us/img451/7029/caraudiowiringv2hj1.png" alt="" class="fr-fic fr-dii fr-draggable " style="" />Would there be any implications installing this way? I would prefer to install this way as it would probably save on speaker cable not having to make runs from opposite ends and it seems easier. Would this put any additional straing on the amp or anything else that I should be aware of?</blockquote>

[QUOTE="kai_, post: 2005952, member: 569644"] I was just going over the install manuals for the diamond components and had a look again at the crossover wiring and I noticed this: [IMG]http://img328.imageshack.us/img328/1517/crossoverszv8.jpg[/IMG] I presume that this means that it's possible to use the remaining connections for rear speakers that are connected directly to the head unit in my above diagram? If so, my revised install would look like this: [IMG]http://img451.imageshack.us/img451/7029/caraudiowiringv2hj1.png[/IMG] Would there be any implications installing this way? I would prefer to install this way as it would probably save on speaker cable not having to make runs from opposite ends and it seems easier. Would this put any additional straing on the amp or anything else that I should be aware of? [/QUOTE]

Verification