Reply to thread

Message: <blockquote data-quote="goingdef" data-source="post: 7814802" data-attributes="member: 584989"><p>It's not a ground issue it's most likely incorrect gain settings along with the fact there are not many 4ch amps that will run around a 1ohm load per channel and if they will they get hot fast and require a lot of current to do it at all. My Rf T600.2 will run at 1ohm per ch(or 2ohms bridged) for about 30minutes then it overheats, he needs to wire the speakers properly or use a x-over to disperse the signal to the 3 speakers in each door.</p></blockquote><p></p>

Top